Инструкция С Настройками для Canon LV-7370

❼

Displays the status of the lamp / filter, the current signal, the wired LAN, and the version. This item has four pages. 
The information included is as follows:

[Remaining lamp time] (%)  

[Lamp counter] (H)

[Filter counter] (H)

Remanng Lamp Tme/Lamp Counter
The projector has the Quiet mode. The lamp life varies depending on two modes: quiet mode and normal mode.
The [Remaining lamp time] shows the percentage of remaining bulb life. The [Lamp counter] shows the amount of 
lamp usage (hours).
•  When the remaining lamp time reaches 0%, the “Replace with the new lamp.” message will be displayed. Re-

place with the new lamp.

  See page 

 for lamp replacement.

•  The message for lamp replacement will be displayed under the following conditions:
  - one minute after the projector has been powered on.
  - when the POWER button on the projector cabinet or on the remote control is pressed.
  To cancel the message, press any button on the projector cabinet or the remote control.
•  When the remaining lamp time reaches 0%, the Remaining lamp time bar indicator changes from 0% to 100(H) 

in red and starts counting down.

  When the remaining lamp time reaches 0 hours, the projector will not turn on. 

3000

4000

LV-LP31