Инструкция для Canon Wireless File Transmitter WFT-E4 II A

28

This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi Protected 
Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identification number 
specified on the camera is set on the wireless LAN terminal to establish a connection. 
Even if there are multiple wireless LAN terminals active in your area, this is a relatively reliable 
method of establishing a connection using a shared identification number. 
It may take about one minute to establish connection. 
Connection may not be possible if stealth functions are enabled on the wireless LAN 
terminal. Deactivate stealth functions.

 

Turn the <5> dial to select [WPS (PIN mode)], 
and then press <0>. 

 

Select [OK] and press <0> to go to the next 
screen. 

 

On the wireless LAN terminal, specify the 8-digit 
PIN code shown on camera LCD monitor. 

 

For instructions on setting PIN codes on the 
wireless LAN terminal, refer to the instruction 
manual of the wireless LAN terminal. 

 

Select [OK] and press <0> to display the 
confirmation screen. 

 

Select [OK] and press <0> to establish a 
connection with the wireless LAN terminal. 

 

When the connection with the wireless LAN 
terminal is established, the [Network] screen 
(p.29) is displayed.

COP

Y