Инструкция для Canon Wireless File Transmitter WFT-E4 II A

Скачать
Страница из 128
34
These instructions are continued from Chapter 1.
1
 
Turn the <5> dial to select [Address setting], 
and then press <0>.
2
 
If you have set the DNS server setting to 
[Disable], the screen at left is displayed.
 
Press <0> to select the input position, and then 
turn the <5> dial to enter the IP address of the 
FTP server.
 
If you have set the DNS server IP address setting 
to [Auto assign] or [Manual setting], the screen 
at left is displayed.
 
For instructions on screen operations, refer to 
“Virtual Keyboard Operation” (p.31).
 
Enter the FTP server’s server name or IP address.
3
 
In [Port number setting], enter 00021, in most 
cases.
 
Turn the <5> dial to select [OK], and then press  
<0> to go to the next screen.
4
  
 
Complete the [Passive mode] settings.
 
If an Error 41 (“Cannot connect to FTP server”) is 
displayed in step 8, setting [Passive mode] to 
[Enable] may resolve it.
5
 
Complete the [Proxy server] settings.
 
Turn the <5> dial to select [OK], and then press 
<0> to go to the next screen.
Configuring FTP Communication Settings
COP