Инструкция для Canon Wireless File Transmitter WFT-E4 II A

68

 

Arrange the slave cameras in clear view of the master camera, without objects between 
them. 

 

You can arrange master cameras in an overall circumference of up to approximately 100 m / 
328 ft. However, the distance supported for linked shooting may be shorter depending on 
the wireless communication conditions, which are affected by how the cameras are 
arranged, the environment of use, and weather conditions. 

 

Pressing the shutter button halfway on the master camera puts slave cameras in the same 
state, as if the shutter buttons were pressed halfway. Similarly, fully pressing the shutter 
button on the master camera has the same effect on slave cameras, which respond as if the 
shutter buttons were fully pressed. 

 

There will be a slight delay after you release the master camera shutter until the slave 
camera shutters are released. (Simultaneous capture is not possible.) 

Master camera

Slave camera

Slave camera

Slave camera

Slave camera

 

During linked shooting, when you press the AE lock or depth-of-field preview button, the camera 
focuses and meters as if you had pressed the shutter button halfway.

 

Once you have established a connection between the master camera and slave cameras, the 
settings are retained even after you replace the batteries. 

 

If you will no longer use a slave camera in linked shooting, set [Communication mode] to 
[Disconnect] on that slave camera. 

 

Any cameras compatible with linked shooting, when they have WFT series transmitters attached, 
can be used as slave cameras, regardless of model. 

COP

Y