Инструкция для Canon Wireless File Transmitter WFT-E4 II A
92
Connecting GPS Devices via Bluetooth
5
Select [OK].
After the Bluetooth unit is attached to the
transmitter, the transmitter’s <USB> lamp blinks in
green and a message is displayed indicating that a
connection has been established.
transmitter, the transmitter’s <USB> lamp blinks in
green and a message is displayed indicating that a
connection has been established.
When the confirmation message is displayed, select [OK].
X
At this point, the menu option [Disconnect]
becomes available. Select this option before
detaching the GPS device.
becomes available. Select this option before
detaching the GPS device.
6
Establish a wireless connection between
the GPS device and Bluetooth unit.
the GPS device and Bluetooth unit.
Turn on the GPS device and activate Bluetooth® on it.
Select [Bluetooth device connection].
X
Nearby Bluetooth® devices in use are listed. (Only
GPS devices can be connected.)
GPS devices can be connected.)
7
Select the GPS device.
Press <0> to display the connection status of
Bluetooth® devices.
Bluetooth® devices.
Pressing <0> when the status is [Not conn.] will
list nearby Bluetooth® devices in use.
list nearby Bluetooth® devices in use.
Turn the <5> dial to select [GPS] , and then
press <0>.
press <0>.
Select [OK] and press <0>.
If a Bluetooth® password has been set on the
GPS device, a password input screen is displayed.
Enter the password.
GPS device, a password input screen is displayed.
Enter the password.
X
The transmitter now starts to establish a
connection with the GPS device.
connection with the GPS device.
It may take a few minutes to establish a
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
COP
Y