Инструкция С Настройками для Canon VIXIA HF R62
278
Do’s and Don’ts
• Secure Digital (SD) memory cards have
a physical switch to prevent writing on
the card so as to avoid the accidental
erasure of the card’s content. To write-
protect the memory card set the switch
to the LOCK position.
the card so as to avoid the accidental
erasure of the card’s content. To write-
protect the memory card set the switch
to the LOCK position.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the
date/time and other settings. The built-in lithium battery is recharged
while you use the camcorder; however, it will discharge completely if
you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power
adapter to the camcorder and leave it connected with the camcorder
off. The built-in lithium battery will be fully charged after about 24 hours.
date/time and other settings. The built-in lithium battery is recharged
while you use the camcorder; however, it will discharge completely if
you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power
adapter to the camcorder and leave it connected with the camcorder
off. The built-in lithium battery will be fully charged after about 24 hours.
Disposal
When you delete movies or initialize the memory, only the file allocation
table is altered and stored data is not physically erased. When you dis-
pose of the camcorder or memory card or give either to another per-
son, initialize the camcorder’s built-in memory (Donly) or
memory card using the [Complete Initialization] option (A 41). Fill it up
with unimportant recordings, and then initialize it again using the same
option. This makes recovering the original recordings very difficult.
table is altered and stored data is not physically erased. When you dis-
pose of the camcorder or memory card or give either to another per-
son, initialize the camcorder’s built-in memory (Donly) or
memory card using the [Complete Initialization] option (A 41). Fill it up
with unimportant recordings, and then initialize it again using the same
option. This makes recovering the original recordings very difficult.
LOCK switch