Инструкция для Canon REALiS WUX4000 D Pro AV
195
Installation Manual
Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following mes-
sage (two types) is displayed for 10 seconds every time the projector is turned on.
sage (two types) is displayed for 10 seconds every time the projector is turned on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
• Only the [ ], [ ],
• Only the [ ], [ ],
OK and POWER buttons are available while this screen is displayed.
• When you press the POWER button, “Push POWER button again to turn off power.”
message appears.
• After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
• This message will not be displayed again if you select [Cancel] in response to the mes-
sage “Do you want to display this message again?”.
3,000 hours or more
If this screen is displayed, replace the lamp by referring to the procedure on
• Only the
POWER button is available while this screen is displayed.
• When you press the
POWER button, the “Push POWER button again to turn off power.”
message appears.
• When this screen has disappeared after being displayed for 10 seconds, all buttons
become operable.
• You can check the usage time of the lamp in [Lamp counter] in the [System settings]
menu. (
)
• This screen is not displayed when [Lamp warning display] is set to [Off]. (WX6000 /
SX6000) (