Инструкция С Настройками для Canon EOS Rebel T6

184

You can prevent the beeper from sounding when focus is achieved or 
during self-timer operation.

Under the [z1] tab, select [Beep], then 
press <0>. Select [Disable], then press 
<0>.

This setting prevents shooting if there is no card in the camera.

Under the [z1] tab, select [Release 
shutter without card], then press <0>. 
Select [Disable], then press <0>.
If there is no card inserted in the camera 
and you press the shutter button, “Card” 
will be displayed in the viewfinder, and 
you cannot release the shutter.

You can set how long the image is displayed on the LCD monitor 
immediately after shooting. If [Off] is set, the image will not be displayed 
immediately after shooting. If [Hold] is set, the image review will be 
displayed up until the [51: Auto power off] time has elapsed.
During image review, if you operate any camera controls such as 
pressing the shutter button halfway, the image review will end.

Under the [z1] tab, select [Image 
review], then press <0>. Select the 
desired setting, then press <0>.

3

3

3