Инструкция С Настройками для Canon EOS Rebel T6

263

3

 Custom Function SettingsN

This function reduces the noise generated in the image. Although 
noise reduction is applied at all ISO speeds, it is particularly effective 
at high ISO speeds. At low ISO speeds, the noise in the darker parts of 
the image (shadow areas) is further reduced. Change the setting to 
suit the noise level.
0: Standard

Improves the highlight detail. The dynamic range is expanded from 
the standard 18% gray to bright highlights. The gradation between 
the grays and highlights becomes smoother.



With setting 2, the maximum burst during continuous shooting will greatly 
decrease. Also, the continuous shooting speed may be slower.



If you play back or directly print a 1 or 1+73 image with the 
camera, the high ISO speed noise reduction effect may become smaller. 
Check the noise reduction effect or print noise-reduced images with 
Digital Photo Professional (EOS software, p.314).



If you send RAW images to a smartphone, the high ISO speed noise 
reduction effect of saved images on the smartphone may become 
smaller. Therefore, if you shoot RAW images, setting the image-
recording quality to 1+73 is recommended.



With setting 1, the Auto Lighting Optimizer (p.123) is automatically set to 
[Disable] and the setting cannot be changed.



With setting 1, noise (grainy image, banding, etc.) may become slightly 
more noticeable than with setting 0.

With setting 1, the ISO setting range will be ISO 200 - ISO 6400.
Also, the <A> icon will be displayed on the LCD monitor and in the 
viewfinder to indicate that highlight tone priority is enabled.