Инструкция для Canon imagePROGRAF iPF785

To enable automatic cutting, click Yes in the 

Automatic Cutting list. If you prefer to cut the paper later your-

self, click Print Cut Guideline.

Click OK to close the Roll Paper Options dialog box.

Confirm the print settings and print as desired.

Note

Roll paper will be automatically cut after printing.

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.

Note

The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.

Choose Page Setup from the application menu to display the Page Attributes dialog box.

Note

The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.

If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print
from the application software menu.

 

 

Select the printer in the 

Format for list.

Choose the original size in the 

Paper Size list.

Click 

OK to close the dialog box.

Choose Print in the application menu.

iPF785

                                                                                                                                                                       

Cutting Roll Paper After Printing (Mac OS)

                                                                                                                                                                                                                             

Enhanced Printing Options

Other useful settings

153