Инструкция для Canon imagePROGRAF iPF685

 

When the processing is complete, "Completed! Turn Power
Off!!" is displayed. Press the Power button to turn the power
off.

Pack the printer

Disconnect the power cord and interface cable.

Important

Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.

 

Tape down printer covers to secure them, in the re-
verse order of tape removal during installation.

Remove the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure in reverse.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.

The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.

 

 

iPF685 Series

                                                                                                                                                                         

Reinstalling the Printer

                                                                                                                                                                                                                       

Printer Relocation

Preparing to Transfer the Printer

65