Инструкция для Canon VB-H610VE

136

The steps below explain how to check the version of this 

software.

The VB-C60, VB-C500D, and VB-C500VD support 

MPEG-4 format, while the VB-S30D, VB-S31D, VB-S800D, 

VB-S900F, VB-S805D, VB-S905F, VB-H43, VB-H630VE, 

VB-H630D, VB-H730F, VB-H41, VB-H610VE, VB-H610D, 

VB-H710F, VB-M42, VB-M620VE, VB-M620D, VB-M720F, 

VBM40, VB-M600VE, VB-M600D, and VB-M700F support 

the H.264 format. Note that the following limitations apply.

• The following video window settings cannot be set, and 

the frame rate settings on the camera are enabled.

– Maximum Frame Rate

– Auto Adjust Frame Rate

• Synchronization of audio and video is not guaranteed.

• The frame rate settings on the camera are enabled.

• The [Reduce recording frame rate when disk is under 

high load] setting in the Storage Server Group Settings 

is disabled.

• The [Record Now] option only supports JPEG format. 

You cannot use this option to record video in MPEG-4 

format or H.264 format.

• You can perform the following operations. However, 

you cannot use [Fast Reverse], [Previous Frame], and 

[Next Frame].

– Specify the playback time on the timeline

– Start playback from the live event display window 

and the event search window

– You can use [Pause], [Fast Forward], [Previous 

Event], and [Next Event]

• If you change the recording format of a recording 

schedule from MPEG-4 or H.264 to JPEG part of the 

way through the recording, then when you reverse the 

recording, the video disappears when you transition 

from the JPEG segment to the MPEG-4 or H.264 

segment, and the “No Recorded Video” error message 

is displayed.

• Recordings in MPEG-4 and H.264 format recorded with 

this software can only be played back with this 

software. However, you can use [Extract Video] to save 

the recording as a .mov file and use QuickTime or other 

compatible software to play back the recording.

Start the Viewer.

Click [Help] > [About].

Check the version of the software on the displayed 

dialog box.

Click the Start button > [Control Panel] > [Uninstall a 

program] or [Add or Remove Programs].

Check the version of the software in the displayed list.

Only H.264(1) video can be displayed and recorded. The 

software does not support H.264(2) video, even if using a 

camera that does support H.264(2).