Справочник Пользователя для ASUS P9D-MV

ASUS P9D-M Series

5-5

The Intel

®

 Rapid Storage Technology enterprise Option ROM utility allows you to create RAID 

0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are 

connected to the Serial ATA connectors supported by the Southbridge.

The navigation keys at the bottom of the screen allow you to move through the menus 

and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not 

exactly match the items on your screen.

You may have to press <Ctrl>+<I> more than once to enter the main menu.

To launch the Intel

®

 Rapid Storage Technology enterprise Option ROM utility: 

1. 

Turn on the system.

2. 

During POST, press <Ctrl+I> to display the utility main menu.

Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have 

set the correct jumper settings of the motherboard, and have set the correct SATA mode in 

the BIOS setup. You can refer to sections 5.1.2 Installing hard disk drives, 5.1.3 Setting 

Jumpers, and 5.1.4 Setting the RAID mode in BIOS for more information.