Справочник Пользователя для ASUS Z97-P

1-20

Chapter 1: Product introduction

System power LED (2-pin +PWR_LED-)
This 2-pin connector is for the system power LED. Connect the chassis power LED

cable to this connector. The system power LED lights up when you turn on the system

power, and blinks when the system is in sleep mode.

Hard disk drive activity LED (2-pin +HDD_LED-)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable

to this connector. The HDD LED lights up or flashes when data is read from or written

to the HDD.

ATX power button/soft-off button (2-pin PWR_SW)
This connector is for the system power button. Pressing the power button turns the 

system on or puts the system in sleep or soft-off mode depending on the operating 

system settings. Pressing the power switch for more than four seconds while the 

system is ON turns the system OFF.

Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without 

turning off the system power.

This connector supports several chassis-mounted functions.

PIN 1

PWR_BTN

PWR_LED+ PWR_LED- PWR GND

HDD_LED+ HDD_LED-

Ground

HWRST#

(NC)

F_PANEL

+PWR_LED-

+HDD_LED- RESET