Справочник Пользователя для OKI ES9410dn 01267201

Colour matching (advanced) > 31

There are four classes of ICC profile supported by the Graphic Pro colour matching system:  

There are three steps to using the Graphic Pro colour matching system: 
1.

Gather or create ICC profiles (see 

Download ICC profiles to the printer storage device (

)

Select the ICC profiles in the printer driver when printing (

Where can I get the profiles I need? 

RGB Source
(RGB Input)

These profiles describe the device that was used to 
capture RGB data (e.g. scanner or digital camera).
The RGB Input Profile may also be your monitor profile if 
you are trying to match to your screen.

CMYK 
Simulation
(CMYK input)

These profiles describe the CMYK device whose colours 
you are trying to simulate. Typically this would be another 
manufacturer's printer or an offset printing press.
Profiles are already built-in to the printer for commercial 
printing press inks such as SWOP or Euroscale.

Printer
(CMYK Output)

This profile describes the colour characteristics of your 
own printer.
The printer already has factory default profiles built-in, but 
you can replace these profiles with your own if required.

Link Profile

This is a special type of ICC profile that converts directly 
from CMYK to CMYK.
For example, a link profile could convert directly from the 
CMYK space of another printer to the CMYK space of your 
printer.

RGB Source
(RGB Input)

Obtain your RGB source profiles from your scanner, 
camera or monitor manufacturer.

CMYK Simulation
(CMYK input)

Obtain the simulation profile from the manufacturer of the 
printer you wish to simulate.

Printer
(CMYK Output)

The factory default profiles for your printer are built-in. If 
you need greater accuracy, you should create your own 
printer profile using third-party ICC profile creation 
software.

Link Profile

You can create Link profiles using third-party ICC profile 
creation software.
Note that not all ICC profile creation software can create 
Link profiles.