Справочник Пользователя для OKI ES9410dn 01267201

Finishing options > 56

This feature enables printing on non-standard sized print media. 
The multipurpose tray is used for feeding non-standard media sizes. Print media width can 

be from approximately 76mm to 328mm, and its length can be from 90mm to 1320mm. 

Actual limits vary slightly depending on which printer driver you use and your computer’s 

operating system.
Some applications software may not produce the desired results with non-standard print 

media sizes, and some experimentation may be required to obtain the results you want.

In the driver’s Layout tab, click Advanced.    

In the Advanced Options window, under Paper/Output, choose PostScript 

Custom Page Size from the Paper Size drop-down list.

In the PostScript Custom Page Size Definition 

window, Choose your paper feed direction from the 

drop-down list.
The available choices are:

Notice that the size ranges available swap places when you change the paper feed 

direction between a portrait and a landscape choice.
Remember that the width of the multipurpose tray is limited to the width of an A3 

sheet (297mm), so if your paper is longer than this you will have to feed it short edge 

first.

The page is portrait (tall) format and you will 
feed the top of the page into the printer.

The page is landscape (wide) format and you 
will feed the top of the page into the printer.

The page is portrait (tall) format and you will 
feed the bottom of the page into the printer.

The page is landscape (wide) format and you 
will feed the bottom of the page into the printer.