Справочник Пользователя для ASUS ESC4000-FDR G2S

Chapter 2:  Hardware setup

2-18

You may need to remove previously installed system components when installing or removing 

system devices. Or you may need to install the optional components into the system. This 

section tells how to remove/install the following components:

1. 

System fans

2. 

Redundant power supply units

3. 

ASUS PIKE RAID card (optional)

Ensure that the system is turned off before removing any components. 

To uninstall the system fans

1. 

Disconnect the system fan cable from 

the fan connector on the motherboard 

and carefully remove the system fan 

cable from the cable holder.

2. 

Lift the fan then set aside.

3. 

Repeat step 1 to 2 to uninstall the other 

system fans.