Справочник Пользователя для ASUS ESC4000-FDR G2S

Chapter 2:  Hardware setup

2-26

Follow the steps below to install the optional accelerator to the system.

1. 

Locate and loosen the thumbscrew in 

front of the accelerator bracket.

2. 

Firmly hold the bracket then pull it up to 

detach it from the motherboard.

4. 

Thread the white end of the 4-pin 

power cable through the airduct of the 

accelerator.

3. 

Connect the red end of the 8-pin power 

cable to the power connector on the 

accelerator.