Краткое Руководство По Установке для ASUS PQ321QE

E

•  This product is for use indoors.
•  A mounting bracket compliant with VESA specifications is 

required. 

•  To install on a stand (commercially available) or on a wall, or to 

remove or move the monitor, consult your dealer.

•  Mounting the monitor on the wall requires special expertise 

and the work must be performed by an authorized ASUS dealer. 
You should never attempt to perform any of this work yourself. 
Our company will bear no responsibility for accidents or injuries 
caused by improper mounting or mishandling.

•  Use the monitor with the surface perpendicular to a level 

surface. If necessary, the monitor may be tilted up to 25 
degrees upward or 5 degrees downward.

•  This monitor should be used at an ambient temperature 

between 32°F (0°C) and 104°F (40°C). Provide enough space 
around the monitor to prevent heat from accumulating inside.

2

[5]

2

[5]

2 [5]

7-7/8 [20]

2

[5]

2

[5]

*

*

Unit: inch [cm]

7-7/8 [20]

2 [5]

Unit: inch [cm]

*  When you install this monitor on a wall, the monitor emits 

heat during operation, please be aware that this heat may 
discolor or alter the wall.

•  If it is difficult to provide sufficient space for any reason such 

as the installation of the monitor inside a housing, or if the 
ambient temperature may be outside of the range of 32°F (0°C) 
to 104°F (40°C), install a fan or take other measures to keep the 
ambient temperature within the required range.

•  Do not block any ventilation openings. If the temperature 

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.
•  When installing the monitor in landscape orientation, you 

can attach the supplied 
horizontal sticker 
(Operation buttons) to the 
right side.

* Liquid Crystal Display Monitor: 1   * Power cord: 1   * AC adapter: 1   
* Setup Manual (this manual): 1   * DisplayPort cable: 1   * RS-232C conversion cable (Φ3.5 mini-jack): 1
* Pedestal (for stand): 1   * Strut (for stand): 1   * Attachment plate (for stand): 1 (preinstalled on monitor)
* Countersunk screws (M4 x 6 without washers): 5   * Screws (M4 x 10 with washers): 4   * Hex wrench: 1
* Cable clamp: 2   * Cable clamp (small): 1   * Cable clamp (large): 2   * Horizontal Sticker (operation buttons): 1

If any component should be missing, please contact your dealer.

Horizontal sticker 

(Operation 

buttons)