Справочник Пользователя для ASUS P9D-MH/SAS/10G-DUAL

ASUS P9D-MH Series

6-3

After creating the RAID sets for your server system, you are now ready to install an 
operating system to the independent hard disk drive or bootable array. This part provides the 
instructions on how to install the RAID controller drivers during OS installation.

The system does not include a floppy drive. You have to use a USB floppy drive when 
creating a SATA RAID driver disk.

A floppy disk with the RAID driver is required when installing Windows

®

 or Red Hat

®

 

Enterprise operating system on a hard disk drive that is included in a RAID set. You can 
create a RAID driver disk in DOS (using the Makedisk application in the support DVD).
To create a RAID driver disk in DOS environment:

1. 

Place the motherboard support DVD in the optical drive.

2. 

Restart your computer.  

3.  

Enter the BIOS Setup.

4. 

Select the optical drive as the first boot priority to boot from the support DVD. Save 
your changes.

5. 

Exit the BIOS Setup and restart your computer. 

 

The following Makedisk menu appears. 

6. 

Select the 

C22x INTEL RAID Driver and press <Enter> to go to the sub-menu.

7. 

From the C22x Intel RAID Driver sub-menu, use the Up or Down arrow keys to select 
the driver and press <Enter> to create the RAID driver disk.