Справочник Пользователя для ASUS RS100-E8-PI2

Chapter 2:  Hardware setup

2-2

• 

Unplug the power cord before removing the chassis cover.

• 

Take extra care when removing the chassis cover. Keep your fingers away from 

components inside the chassis that can cause injury, such as the CPU fan, rear fan, 

and parts with sharp or protruding edges.

• 

The images of the barebone server shown in this section are for reference purposes 

only and may not exactly match the model you purchased. 

To remove the chassis cover:
1. 

Use a Phillips screwdriver to remove the three screws on the chassis cover.

2. 

Firmly hold the cover and slide it toward the rear panel for about half an inch until it is 

disengaged from the chassis.

3. 

Lift the cover from the chassis.