Справочник Пользователя для ASUS RS100-E8-PI2
Chapter 2: Hardware setup
2-18
2.4.3
Installing a hard disk drive to the HDD bay 2
To install a 3.5-inch Serial ATA HDD to HDD bay 2:
1.
If you have an Optical Disc Drive (ODD) installed, remove it first before installing a
3.5-inch Sertial ATA HDD to HDD bay 2.
To remove the ODD:
1.a Locate the ODD in the server chassis.
1.a Locate the ODD in the server chassis.
1.b Disconnect the SATA and power
cable on the ODD.
1.c Release the screw that secures
the ODD to the chassis and set
aside.
Optical Disc Drive
HDD drive tray
ODD cable
HDD bay 2
ODD cable