Справочник Пользователя для ASUS PIKE 2308
2-10
Chapter 2: RAID configuration
2.2.3
RAID 0 volume
The RAID 0 feature supports volumes with two to ten disks. You may combine an RAID 0
volume with an RAID 1 or RAID 1E/10 volume.
To create a RAID 0 volume:
1.
1.
Follow steps 1–4 of the section RAID 1 volume.
2.
The Select New Volume Type screen appears.
Use the arrow keys to select Create RAID 0 Volume, then press <Enter>.
3.
The Create New Volume screen shows the disks you can add to make up the RAID
0 volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk
column. To include this disk in the array, press <+>, <->, or <Space>.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose volume type to create
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Select New Volume Type -- SAS2308
Create RAID 1 Volume
Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares.
ALL DATA on
volume disks will be DELETED!
Create RAID 1E/10 Volume
Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks including up
to 2 optional hot spares. ALL DATA
on
volume disks will be DELETED!
Create RAID 0 Volume
Create a RAID 0 volume consisting of
2 to 10 disks. ALL DATA
on
volume disks will be DELETED!
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for volume C = Create volume
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Create New Volume -- SAS2308
Volume Type: RAID 0
Volume Size(GB): -------
Slot Device Identifier RAID Drive Pred Size
Num
Disk Status Fail (GB)
0 ATA WDC WD800JD-22LS1D06
[No]
---------- No 74
1 ATA WDC WD800JD-22LS1D06
[No]
---------- No 74
2 ATA WDC WD800JD-22LS1D06
[No]
---------- No 74
3 ATA WDC WD800JD-22LS1D06
[No]
---------- No 74