Справочник Пользователя для ASUS B85M-E

2‑36

Chapter 2: Getting started

[Disabled] 

 

 All USB devices will not be available until OS boot up for a 

fastest POST time.

[Full Initialization]  

 All USB devices will be available during POST. This process will 

extend the POST time.

[Partial Initialization] 

 For a faster POST time, only the USB ports with keyboard and 

mouse connections will be detected.

Select any of these settings when PS/2 keyboard and mouse are installed. These settings 

only apply when Fast Boot is enabled.
[Auto] 

For a faster POST time, PS/2 devices will only be available when the 

system boots up or rebooted when the PS/2 devices have not been 

reconnected or changed. If you disconnect or change PS/2 devices before 

restarting the system, PS/2 devices will not be available and BIOS setup 

program will not be accessible via PS/2 devices.

[Full Initialization] For full system control, PS/2 devices will be available during POST at any 

circumstances. This process will extend POST time.

[Disabled] 

For the fastest POST time, all PS/2 devices will not be available until your 

computer enters the operating system.

[Disabled] 

Select to skip the network stack driver from loading during POST.

[Enabled] 

Select to load the network stack driver during POST.

[Normal Boot] 

Returns to normal boot on the next boot after AC power loss.

[Fast Boot] 

Accelerates the boot speed on the next boot after AC power loss.

[Enabled] 

Display the boot logo during POST.

[Disabled] 

Hide the logo during POST.

Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

This item appears only when you set Boot Logo Display to [Enabled] and allows you to 

adjust the boot logo size. Configuration options: [Auto] [Full Screen] [Disabled].

This item appears only when you set Boot Logo Display to [Enabled]. This item allows you 

to select the desired additional POST waiting time to easily enter the BIOS setup. You can 

only execute the POST delay time during Normal Boot. Configuration options: [1 sec] ~ [10 

sec].

This feature will only work under normal boot.