Справочник Пользователя для ASUS SABERTOOTH Z87

3-42

Chapter 3: BIOS setup

This item appears only when you enable the Assistant Q-Fan Control feature. It allows 

you to set the appropriate performance level of the assistant fan.

[Standard] 

Set to make the assistant fan adjust automatically depending on the 

chassis temperature.

[Silent] 

Set to minimize the fan speed for quiet assistant fan operation.

[Turbo] 

Set to achieve maximum assistant fan speed.

[Fan Off] 

Set to turn off all assistant fans.

[Manual] 

Set to assign detailed fan speed control parameters.

The following items appear only when you set the Assistant Fan Profile to [Manual].

Use the <+> and <-> keys to adjust the maximum assistant fan duty cycle 

and temperature upper limit. The values range from 40ºC to 90ºC. 

Use the <+> and <-> keys to adjust the maximum assistant fan duty cycle. 

The values range from 20% to 100%. When the temperature reaches the 

upper limit, the assistant fan will operate at the maximum duty cycle.

Displays the lower limit of the temperature.

Use the <+> and <-> keys to adjust the minimum assistant fan duty cycle. 

The values range from 0% to 100%. When the temperature is under 40ºC, 

the assistant fan will operate at the minimum duty cycle.

Allows your assistant fans to run at 0% duty cycle when the motherboard’s 

temperature drops to a certain degree.
Configuration options: [Disabled] [Enabled]

Allows you to extend the turbo fan’s working time for good heat dissipation and lowers the 

temperature after system shutdown.
Configuration options: [Disabled] [1 minute] [2 minutes] [3 minutes] [5 minutes] [10 minutes]

This item allows you to enable or disable the Anti Surge function for UVP or OVP protection.
Configuration options: [Disabled] [Enabled]