Справочник Пользователя для ASUS PIKE 2208

ASUS PIKE 2208

2-37

The SAS controller firmware monitors the activity and performance of all storage 

configurations and devices in the system. When an event occurs (such as the 

creation of a new virtual drive or the removal of a drive) an event message is 

generated and is stored in the controller NVRAM. You can use the WebBIOS CU 

to view these event messages. To do this, click Events on the main WebBIOS CU 

screen. The Event Information screen appears, as shown in the following figure.

The right side of the screen is blank until you select an event to view. The First 

Sequence and Last Sequence fields in the upper left of the screen show you how 

many event entries are currently stored.
To view event information, follow these steps:
1.  Select an event locale from the Event Locale drop-down menu. For 

example, select Enclosure to view events relating to the drive enclosure.

2.  Select an event class: Informational, Warning, Critical, Fatal, or Dead.
3.  Enter a start sequence number, between the first sequence and last 

sequence numbers. The higher the number, the more recent the event.

4.  Enter the Number of events of this type that you want to view, and click Go.
 

The first event in the sequence appears in the right panel.

5.  Click Next or Prev to page forward or backward through the sequence of 

events.

6.  If you want, select different event criteria in the left panel, and click Go again 

to view a different sequence of events.

 

Each event entry includes a time stamp and a description to help you 

determine when the event occurred and what it was.