Справочник Пользователя для ASUS TS700-E7/RS8

TS700-E7/RS8

7-1

7

After creating the RAID sets for your server system, you are now ready to install 

an operating system to the independent hard disk drive or bootable array. This part 

provides the instructions on how to install the RAID controller drivers during OS 

installation.

The system does not include a floppy drive. �ou have to use a USB floppy drive 

when creating a SATA RAID driver disk.

If you have created RAID sets with the LSI Software RAID configuration utility, 

the boot priority of the SATA optical disk drive has to be manually adjusted. 

Otherwise, the system will not boot from the connected SATA ODD. 

A floppy disk with the RAID driver is required when installing Windows® XP 

/ Server 2003 or Linux operating system on a hard disk drive that is included 

in a RAID set. You can create a RAID driver disk in DOS (using the Makedisk 

application in the support DVD).

To create a RAID driver disk in DOS environment:
1.  Place the motherboard support DVD in the optical drive.
2.  Restart the computer, and then enter the BIOS Setup.
3.  Select the optical drive as the first boot priority to boot from the support DVD. 

Save your changes, and then exit the BIOS Setup.

4.  Restart the computer. The Makedisk menu appears.