Справочник Пользователя для ASUS TS700-E7/RS8

2-8

Chapter 2: Hardware setup

To install the CPU heatsink and fan connector:
1.  Place the CPU heatsink and fan on 

top of the installed CPU, ensuring 

that the four screws match the holes 

on the support plate, and the arrow 

on the fan faces the rear panel of 

the server chassis.

2.  Twist each of the four screws with 

a Philips (cross) screwdriver just 

enough to attach the CPU heatsink 

and fan to the motherboard. When 

the four screws are attached, 

tighten them one by one to 

completely secure the CPU heatsink 

and fan.

3.  Connect the CPU heatsink and 

fan cable to the connector on the 

motherboard.

Do not forget to connect the CPU heatsink and fan connector. Hardware 

monitoring errors can occur if you fail to plug this connector.