Справочник Пользователя для ASUS RS700-E7/RS4-C

Chapter 2:  Hardware setup

2-26

6.  Disconnect the data cable from 

ISATA1 and connect it to the 

PSAS1 connector. 

7.  Ensure that the SGPIO1_SEL 

jumper is set to pins 2-3. Refer 

to 2.7 SATAII/SAS backplane 

cabling on page 2-19 for the 

jumper setting details.

5.  Secure the RAID card with the 

screw that you removed earlier.

The heatsink on PIKE 2108 Series might interfere with the components on the 

expansion card. Ensure that the height of the component is less than 5.8 mm.

When using a PIKE RAID card, ensure that the data cables are connected to 

the PSAS1.