Справочник Пользователя для ASUS RS700-E7/RS4

Chapter 2:  Hardware setup

2-20

•  The bundled system cables are pre-connected before shipment. You do 

not need to disconnect these cables unless you will remove pre-installed 

components to install additional devices. 

•  Refer to Chapter 4 for detailed information on the connectors.

1.  8-pin BPPWR1 power connector (from power supply to backplane)
2.  Auxiliary panel connector (from motherboard to front I/O board)
3.  Panel connector (from motherboard to front I/O board)
4.  System fan connectors (from motherboard FAN1-8 to system fans)
5.  USB connector (from motherboard to front I/O board)
6.  SATA5 connector (from motherboard to SATAII/SAS backplane board to connect 

ODD)

7.  ISATA1 connector (from motherboard to SATAII/SAS backplane board to connect 

HDD 1 - HDD 4)

8.  PSAS1/2 connectors (from motherboard to SATAII/SAS backplane board when 

a PIKE RAID card is installed.)