Справочник Пользователя для ASUS P5V-VM DH

3-20

Chapter 3: Software support

A floppy disk with the RAID driver is required when installing Windows

®

 2000/XP 

operating system on a hard disk drive that is included in a RAID set. 
To create a VIA RAID driver disk:
1.  Place the motherboard support CD into the CD-ROM drive.
2.   When the Make disk menu appears, click Make VIA VT8237 RAID Driver 

Disk to create a VIA VT8237 RAID driver disk

 

Or

 

Browse the contents of the support CD to locate the driver disk utility and go 

to \Drivers\VIA 4 in 1 Chipset Driver for the VIA RAID driver disk utility

3   Insert floppy disk to floppy disk drive.
4.   Follow succeeding screen information to complete process.
5.  Write-protect the floppy disk to avoid computer virus infection.

Refer to section “3.2.2 Drivers menu” for details.

To install the RAID driver:
1.  During the OS installation, the system prompts you to press the F6 key to 

install third-party SCSI or RAID driver.

2.  Press <F6> then insert the floppy disk with RAID driver into the floppy disk 

drive.

3.  Follow the succeeding screen instructions to complete the installation.

To create a JMicron RAID driver disk:
1.  Place the motherboard support CD into the CD-ROM drive.
2.   When the Make disk menu appears, click Make JMicron JMB36X 32/64 bit 

RAID/AHCI Driver to create a JMicron JMB363 RAID driver disk.

3   Insert floppy disk to floppy disk drive.
4.   Follow succeeding screen information to complete process.
5.  Write-protect the floppy disk to avoid computer virus infection.