Справочник Пользователя для ASUS M2A-MVP

ASUS M2A-MVP

1-35

System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis 

power LED cable to this connector. The system power LED lights up when 

you turn on the system power, and blinks when the system is in sleep mode.

Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity 

LED cable to this connector. The IDE LED lights up or flashes when data is 

read from or written to the HDD.

System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The 

speaker allows you to hear system beeps and warnings.

ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button 

turns the system on or puts the system in sleep or soft-off mode depending 

on the BIOS settings. Pressing the power switch for more than four seconds 

while the system is ON turns the system OFF.

Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system 

reboot without turning off the system power.

12.  System panel connector (20-8 pin PANEL)
 

This connector supports several chassis-mounted functions.

* 

Requires an ATX power supply.

PANEL

PLED-

PWR

+5V

Speaker

Ground

RESET

Ground

Reset

Ground Ground

PWRSW

PLED+

IDE_LED-

IDE_LED+

IDE_LED

PLED

SPEAKER