Справочник Пользователя для ASUS Xonar D2X

64

ASUS Xonar D2X 

Start RMAA and follow the setup procedure below.

1.  Select both of the playback/recording devices as “ASUS Xonar D2X Audio”.
2.  Select 24bit and 48KHz for the test signals. (If you change the format here, 

please remember to go back to set the same sample rate output in the Xonar 

D2X Audio Center)

3.  Click “Test options” button in RMAA and check “Analyze noise and distortion 

only in 20Hz-20KHz range” (audio in-band for human hearing) in the General 

tab.