Руководство Пользователя для ASUS TS100-E9-PI4

Chapter 2: Hardware Information

2-14

The server system supports three (3) 3.5-inch Serial ATA hard disk drives via the hard disk

drive bays and one 2.5-inch HDD/SSD drive at the bottom of the HDD cage.

To install 3.5-inch Serial ATA hard disk drives:

1. 

Remove the side cover of the chassis. Refer to the Removing the side cover section 

for more information.

2. 

Prepare the 3.5-inch HDD and the bundled set of screws.

3.

Locate the HDD cage lock, press the it up (A), then swing the HDD cage outwards (B)

until it clicks in place.

4. 

Align and insert the 3.5-inch HDD into 

the drive bay ensuring that the screw 

holes on the HDD matches the screw 

holes on the HDD cage.