Справочник Пользователя для ASUS E3M-PLUS V5

2-2

Chapter 2: BIOS information

The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS-based 

utility.

• 

Ensure that you load the BIOS default settings to ensure system compatibility and 

stability. Select the

 Load Optimized Defaults item under the Exit menu. See section 

2.10 Exit Menu for details.

• 

Check your Internet connection before updating the BIOS via the Internet.

To update the BIOS using EZ Flash 3:
1. 

Enter the 

Advanced Mode of the BIOS setup program. Go to the Tool menu to select 

ASUS EZ Flash 3 Utility and press <Enter> to enable it.

2. 

Follow the steps below to update the BIOS via a storage device or Internet.

 Via Storage Device
a)  Insert the USB flash disk that contains the latest BIOS file to the USB port, then 

select 

via Storage Device.

b)  Press <Tab> to switch to the 

Drive field.

c)  Press the Up/Down arrow keys to find the USB flash disk that contains the latest 

BIOS, and then press <Enter>. 

d)  Press <Tab> to switch to the 

Folder Info field.

e)  Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to 

perform the BIOS update process. 

 Via  Internet
a) Select 

via Internet.

b)  Press the Left/Right arrow keys to select an Internet connection method, and then 

press <Enter>.

c)  Follow the onscreen instructions to complete the update.

3. 

Reboot the system when the update process is done.

• 

ASUS EZ Flash 3 supports USB devices, such as a USB flash disk, with FAT 32/16 

format and single partition only.

• 

DO NOT shut down or reset the system while updating the BIOS to prevent system 

boot failure!