Руководство Пользователя для ASUS P10S-X

2-36

Chapter 2: Hardware Information

14.  Chassis intrusion connector (2-pin INTRUSION1)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The chassis 

intrusion sensor or switch sends a high-level signal to this connector when a chassis 

component is removed or replaced. The signal is then generated as a chassis intrusion 

event.

By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper

cap. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

15.  System Management Bus (SMBUS) connector (5-1 pin SMBUS1)
 

This connector controls the system and power management-related tasks. This 

connector processes the messages to and from devices rather than tripping the 

individual control lines.