Руководство Пользователя для ASUS RS200-E9-PS2

Chapter 2: Hardware Setup

2-22

To reinstall the system fans:

1. 

Align the system fans to the screw holes.

2. 

Secure the system fans to the system using the screws you removed earlier.

3. 

Connect the system fan cable to the fan connector on the motherboard.

Ensure that the fans are installed in the correct direction. For RS200-E9-PS2, the airflow

directional arrow on the fan side should point to the inner part of the chassis; for RS200-

E9-PS2-F, the airflow directional arrow on the fan side should point to the outer part of the

chassis

REMOVE FAN 1

REMOVE FAN 2

REMOVE FAN 3

2. 

Disconnect the system fan cable from 

the fan connector on the motherboard, 

then lift the fan and mylar and set 

them aside.