Краткое Руководство По Установке для ASUS DSL-N16

54

•    Local IP: Key in the client’s LAN IP address. 

NOTE: Use a static IP address for the local client to make port forwarding 

work properly. Refer to section 4.2 LAN for information.

•    Local Port: Enter a specific port to receive forwarded packets. 

Leave this field blank if you want the incoming packets to be 
redirected to the specified port range.

•    Protocol: Select the protocol. If you are unsure, select BOTH.

•    Ensure that your server or application is set up and running.
•    You will need a client outside your LAN but has Internet 

access (referred to as “Internet client”). This client should not 
be connected to the ASUS router.

•    On the Internet client, use the router’s WAN IP to access the 

server. If port forwarding has been successful, you should be 
able to access the files or applications.

Differences between port trigger and port forwarding: 

•    Port triggering will work even without setting up a specific 

LAN IP address. Unlike port forwarding, which requires a 
static LAN IP address, port triggering allows dynamic port 
forwarding using the router. Predetermined port ranges are 
configured to accept incoming connections for a limited 
period of time. Port triggering allows multiple computers 
to run applications that would normally require manually 
forwarding the same ports to each PC on the network.

•    Port triggering is more secure than port forwarding since the 

incoming ports are not open all the time. They are opened 
only when an application is making an outgoing connection 
through the trigger port.