Руководство Пользователя для ASUS RS700-E8-RS4 V2
Chapter 4: Motherboard Information
4-10
4.3
Internal connectors
1.
Serial ATA connectors (7-pin SATA1–2 [Blue])
These connectors, controlled by Intel
These connectors, controlled by Intel
®
C612 chipset, are for the Serial ATA signal
cables for Serial ATA hard disk drives (SATA 5 connector for optical drive use by
default).
2.
USB 2.0 connectors (10-1 pin USB56, USB78, Type A USB10)
The USB56 and USB78 connectors are for USB 2.0 ports. Connect the USB module
The USB56 and USB78 connectors are for USB 2.0 ports. Connect the USB module
cable to the connectors, and then install the module to a slot opening at the back of
the system chassis. The USB10 connector is for a A-type internal USB 2.0 device.
The USB connectors comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
The USB port module is purchased separately.
If the M.2 slot is occupied, the SATA6G_6 slot will be disabled.