Справочник Пользователя для ASUS H110I-PLUS D3

[Enabled] 

Enables the HD Audio Device.

[Disabled] 

Disables the HD Audio Device.

The following item appears only when you set the 

HD Audio Controller item to [Enabled].

Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or 

high‑definition audio depending on the audio standard that the front panel audio 

module supports.

[HD Audio] 

Sets the front panel audio connector (AAFP) mode to high definition 

audio.

[AC97] 

Sets the front panel audio connector (AAFP) mode to legacy AC’97

[On] 

Enables the Realtek LAN controller.

[Off] 

Disables the controller.

This item appears only when you set the previous item to [On] and allows you to enable or 

disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [On] [Off]

[Enabled] 

Charges USB devices even when the system is in Power State S5. State 

S5 is the soft‑off mode or shutdown state where your computer has no 

memory state and is not doing any computing tasks.

[Disabled] 

Disables this function.

The sub‑items in this menu allow you to set the serial port configuration.

Serial Port [On]
Allows you to enable or disable the serial port (COM).Configuration options: [On] [Off]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the 

Serial Port to [On] and allows you to select 

the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; 

IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]

When the system enters the S4 state and this item is set to [Enabled], the system will be put 

to deep S4 sleep state to reduce power consumption. The system in deep S4 state can only 

be woken up via the power button. Configuration options: [Disabled] [Enabled]

ASUS H110I-PLUS D3

2‑27