Руководство Пользователя для ASUS RS520-E8-RS8 V2

Chapter 2: Hardware Information

2-12

The system supports 8 (RS520-E8-RS8 V2) or 12 (RS520-E8-RS12-EV2) hot-swap 3.5-inch 

SATAII/SAS hard disk drives. Two hot-swap 2.5-inch hard disk drives are supported on the 

rear panel of RS520-E8-RS12-EV2. The hard disk drive installed on the drive tray connects 

to the motherboard SATAII/SAS ports via SATAII/SAS backplane.

3. 

Slide the HDD into the drive tray with 

the SATA port facing towards the back 

of the expansion slot.

 

Ensure that the screw holes on the 

HDD matches the screw holes on the 

tray. 

4. 

Secure the HDD in the HDD tray with four 

screws (two on each side).

To install a 3.5-inch HDD:

1. 

Press the spring lock to release to the 

tray lever.

2. 

Firmly hold the tray lever then pull the 

drive tray out of the bay.