Руководство По Установке для ASUS VivoMini UN62V

1

Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2GB, 4GB, or 

8GB unbuffered with non-ECC 1.35 V DDR3 204-pin SO-DIMMs for a maximum of 16GB memory.
IMPORTANT! Refer to http://www.asus.com for the list of compatible DIMMs. You can only 

install 1.35 V DDR3 SO-DIMM to the VivoMini’s DIMM slots.

•

It is recommended that you install or upgrade the memory modules, wireless card, and

solid state drive (SSD), under professional supervision. Visit an ASUS service center for 

further assistance. 

•

Ensure that your hands are dry before proceeding with the rest of the installation

process. Before installing any of the features in this guide, use a grounded wrist strap or

touch a safely grounded object or metal object to avoid damaging them due to static

electricity.

1. 

Turn off your VivoMini then disconnect all cables and peripherals.

2.

Place the VivoMini on a flat stable surface, with its top side facing down.

Your VivoMini comes with the following items. Please contact ASUS Service Center if you cannot

find the following items:
•

4 pcs holed rubber foot

•

3 pcs 3mm round screws, 1 hexagon screw

15060-4790R100