Руководство Пользователя для ASUS PEI-10G/82599-2S

2-6

Chapter 2: Boot Agent Configuration

The Intel(R) Ethernet Flash Firmware Utility allows you to switch between PXE option ROM 

and iSCSI option ROM. Note that only one option ROM can be used at a time.
To start the Intel(R) Ethernet Flash Firmware Utility:

1. 

Turn on the system.

2. 

Enter DOS enviroment.

The utility must run under pure DOS environment. It cannot run in a DOS box on Windows 

system. You should boot from a DOS floppy without any device drivers

3. 

Within the DOS enviroment, enter the directory with the bootutil file.

4. 

Check the MAC address of the corresponding LAN card:

C:\>bootutil -E

Intel(R) Ethernet Flash Firmware Utility

BootUtil version 1.5.22.2

Copyright(c) 2003-2014 Intel Corporation
NIC= 1 MACAddress=00E018122208

NIC= 2 MACAddress=00E018122209

NIC= 3 MACAddress=00E01803016C

NIC= 4 MACAddress=00E01803016D

NIC= 5 MACAddress=00E01803016E

NIC= 6 MACAddress=00E01803016F
Port Network Address Location Series  WOL Flash Firmware                Version

==== =============== ======== ======= === ============================= =======

  1  00E018122208      1:00.0 10GbE   N/A PXE                           2.3.27

  2  00E018122209      1:00.1 10GbE   N/A PXE                           2.3.27

  3  00E01803016C      8:00.0 Gigabit YES FLASH Not Present

  4  00E01803016D      9:00.0 Gigabit YES FLASH Not Present

  5  00E01803016E     10:00.0 Gigabit YES FLASH Not Present

  6  00E01803016F     11:00.0 Gigabit YES FLASH Not Present

C:\>

5. 

Install the PXE option ROM:

or

Install the iSCSI option ROM:

Port 1 and Port 2 share the same flash.

6. 

Restart the system.