Справочник Пользователя для ASUS ESC8000 G3

Chapter 2:  Hardware setup

2-18

The ESC8000 G3 system supports hot-swap 2.5-inch SATA/SAS hard disk drives. The hard 

disk drive installed on the drive tray connects to the motherboard SATA/SAS ports via the 

SATA/SAS backplane.

To install a 2.5-inch HDD:

1.   Press the spring lock to release the tray lever (A) and to partially eject the tray from the 

bay (B).

2. 

Firmly hold the tray lever and carefully pull the drive tray out of the bay. 

4. 

Release the screws on each side of the drive tray (A) then release the drive tray 

support beam (B).

The drive tray support beam provides horizontal support to the empty drive tray and 

prevents the drive tray from being bent or deformed.

3. 

Place the drive tray in a clean and flat surface.