Справочник Пользователя для ASUS ESC8000 G3

2-25

ASUS ESC8000 G3

2. 

Locate and remove the screw on the metal shutter at the middle of the server (A) then 

remove the metal shutter (B). 

3.   Prepare the GPU air duct and the GPU accelerator.

When installing AMD S9150 or later GPU cards, you need to attach a mylar to the GPU 

air duct first before installing the air duct to the GPU card. To do this, get a mylar (A) then 

attach it to the air duct (B) as shown.

The mylar is bundled with the system and included in the accessory box.

For Nvidia 300W or above GPU cards, it is required to use the dedicated VGA power cables 

with black/white connector. The Nvidia 300W GPU card will not work, or may even cause 

damage to the system, if the wrong VGA power cable is used.