Руководство Пользователя для ASUS Z10PA-D8

5-4

Chapter 5: RAID configuration

3. 

The utility main window appears. Use the arrow keys to select an option from the 

 and then press <Enter>. Refer to the Management Menu 

descriptions on the next page.

 

At the bottom of the screen is the legend box. The keys on the legend box allow you 

to navigate through the setup menu options or execute commands. The keys on the 

legend box vary according to the menu level.

The LSI MegaRAID software RAID configuration utility allows you to create RAID 0, 

RAID 1, or RAID 10 set(s) from SATA hard disk drives connected to the SATA connectors 

supported by the motherboard southbridge chip.
To enter the LSI MegaRAID software RAID configuration utility:

1. 

Turn on the system after installing all the SATA hard disk drives.

2. 

During POST, the LSI MegaRAID software RAID configuration utility automatically 

detects the installed SATA hard disk drives and displays any existing RAID set(s). 

Press <Ctrl> + <M> to enter the utility.

• 

The LSI MegaRAID software RAID configuration utility automatically configures to 

RAID 1 when the SATA to RAID Mode is enabled.

• 

The RAID setup screens shown in this section are for reference only and may not 

exactly match the items on your screen due to the controller version difference.

• 

When you create RAID sets with the LSI MegaRAID software RAID configuration 

utility, the boot priority of the SATA optical drive has to be manually adjusted. 

Otherwise, the system will not boot from the connected SATA ODD.