Руководство Пользователя для ASUS Z10PA-D8

5-29

Z10PA-D8 Series

Select a destination disk with the same size as the original hard disk.

This option is only for the RAID 1 set.

If any of the SATA hard disk drives included in the RAID 1 array failed, the system displays 

the status of the RAID volume as “Degraded” during POST. You can rebuild the RAID array 

with other installed non-RAID disks.
To rebuild the RAID with other non-RAID disk:

1. 

During POST, press <Ctrl>+<I> at the prompt to enter the Intel Rapid Storage 

Technology option ROM utility. 

2. 

If there is a non-RAID SATA Hard Disk available, the utility will prompt you to rebuild 

the RAID. Press the up/down arrow keys to select  the destination disk then Press 

<Enter>  to start the rebuilding process, or press <ESC> to exit.

To exit the utility:

1. 

From the utility main menu, select 4. Exit then press <Enter>. 

2. 

Press <Y> to exit or press <N> to return to the utility main menu.