Справочник Пользователя для ASUS TS700-E8-RS8

Chapter 2:  Hardware setup

2-18

6.

Push the tray lever until it clicks, and

secures the drive tray in place. The drive 

tray is correctly placed when its front 

edge aligns with the bay edge.

7.

Repeat steps 1 to 6 if you wish to install

a second SATA/SAS drive.

The system comes with two hot-swap 2.5-inch hard disk drives on the rear panel for mounting

SATA/SAS or SSD hard disk drives.
To install a 2.5-inch hard disk drive:

1.

Release a drive tray by pushing the

spring lock to the right, and then 

pulling the tray lever outward. The 

drive tray ejects slightly after you pull 

out the lever.

3.

Place the drive tray on a flat surface.

4. 

Release the screws on each side of 

the drive tray to release the drive tray 

metal beam.

5.

Find the hard disk drive you want to

install and its bundled screws.

When the drive tray is out, its case is facing downwards.

2.

Firmly hold the tray lever and pull the

drive tray out of the bay.