Руководство Пользователя для ASUS ASMB8-iKVM

2-4

Chapter 2: Hardware Information

You need to update the ASMB8-iKVM firmware and configure IP source before you start

using the ASMB8-iKVM board.

To update the firmware:

1.

Insert the support CD into the optical drive.

2.

Restart the remote server then press <Del> during POST to enter the BIOS setup.

3.

Go to Boot menu and set the Boot Device Priority item to [CD-ROM].

4.

When finished, press <F10> to save your changes and exit the BIOS setup.

5.

On reboot, select ASMB8-iKVM Firmware Update for Clear Configuration from the 

main menu and press <Enter> to enter the sub-menu.

6.

From the confirmation message, select <Yes> to update the firmware.

7.  Wait for the firmware updating process to finish.

FreeDOS command prompt

Configure BMC IP Source Static IP for Shared LAN

Configure BMC IP Source DHCP IP for Shared LAN

Configure BMC IP Source Static IP for DM_LAN1

Configure BMC IP Source DHCP IP for DM_LAN1

ASMB8 Firnware Updated for Preserve Configuration (SDR, LAN, Username)

ASMB8 Firnware Updated for Clear Configuration (SDR, LAN, Username)

You may update the firmware from the web-based user interface. Refer to the Firmware 

section for more information.