Справочник Пользователя для ASUS PEM-FDR

Rev 2.0-3.0.0

Mellanox Technologies

35

For more details on

 hca_self_test.ofed

, see the file 

hca_self_test.readme

 

under 

docs/

.

Software
• Most of MLNX_OFED packages are installed under the “/usr” directory except for the 

following packages which are installed under the “/opt” directory:
• openshmem, bupc, fca and ibutils 

• The kernel modules are installed under

• /lib/modules/`uname -r`/updates on SLES and Fedora Distributions
• /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distribu-

tions

• /lib/modules/`uname -r`/updates/dkms/ on Ubuntu

# hca_self_test.ofed 

---- Performing Adapter Device Self Test ----

Number of CAs Detected ................. 2

PCI Device Check ....................... PASS

Kernel Arch ............................ x86_64

Host Driver Version .................... MLNX_OFED_LINUX-2.0-2.0.0 (OFED-2.0-2.0.0): 

2.6.32-279.el6.x86_64

Host Driver RPM Check .................. PASS

Firmware on CA #0 NIC .................. v2.9.1000

Firmware Check on CA #0 (NIC) .......... PASS

Firmware on CA #1 NIC .................. v2.11.500

Firmware Check on CA #1 (NIC) .......... PASS

Host Driver Initialization ............. PASS

Number of CA Ports Active .............. 4

Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet)

Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet)

Port State of Port #1 on CA #1 (NIC)..... UP 1X QDR (Ethernet)

Port State of Port #2 on CA #1 (NIC)..... UP 1X QDR (Ethernet)

Error Counter Check on CA #0 (NIC)...... NA (Eth ports)

Error Counter Check on CA #1 (NIC)...... NA (Eth ports)

Kernel Syslog Check .................... PASS

Node GUID on CA #0 (NIC) ............... 00:02:c9:03:00:07:4f:f8

Node GUID on CA #1 (NIC) ............... 00:02:c9:03:00:35:fd:c0

------------------ DONE ---------------------

After the installer completes, information about the Mellanox OFED installation such as 
prefix, kernel version, and installation parameters can be retrieved by running the com-
mand 

/etc/infiniband/info

.